21
CHAPTER 3: Installation
• Some software programs come with special copy-
protection devices called “dongles.” These are
designed to be inserted between the keyboard and
the computer; the programs test for the dongles’
presence to assure that they are being run by their
legal owner only. The Spectra supports some,
but not all, dongles.
• Make sure that the attached CPUs use only generic
mouse drivers such as those by Microsoft or
Logitech. If you use the Microsoft MOUSE.COM
driver, it should be version 4.0 at least and
preferably version 9.01 or higher.
• When you first switch between the two CPUs, you
might notice that their mouse sensitivity (how far or
fast their pointer/cursor moves in response to the
mouse) is different. This is normal. You’ll usually be
able to adjust each CPU’s mouse sensitivity through its
mouse Control Panel, but the specifics vary depending
on the operating system and the mouse driver.
• You should be able to freely disconnect and
reconnect the mouse or keyboard from the Spectra,
but if you have problems when you do this, press the
Spectra’s reset button or issue one of the reset
commands—see Sections 4.5 and 4.6.
To Next Page
Loading...
