36
SERVSWITCH™ SPECTRA
of the keyboard ([1] for CPU 1 or [2] for CPU 2). This
will suspend audio switching, switch the audio to the
chosen computer, and “park” audio access on that CPU
indefinitely. From that point on, when you select a CPU
with [Ctrl] [1], [Ctrl] [2], or [Ctrl] [Backspace], or
when you start and stop scanning with [Ctrl] [S] or
[Ctrl] [X}, it will switch only the keyboard, video, and
mouse, not the audio.
To resume normal simultaneous KVM/audio
switching, enter the “Restart Audio Switching”
command: Press and release [Ctrl], then press and
release [G], then press and release the [0] (zero) key
at the top of your keyboard. Audio will immediately be
switched to the CPU that’s currently selected for KVM
access, and audio will be switched and scanned along
with KVM access as normal.
4.5 Send Null Byte to Resynchronize Mouse
(CPUs with PS/2 Mouse Ports Only)
If your mouse starts acting funny (moves the pointer
or cursor the wrong way or not at all, opens windows
without you clicking on anything, etc.), and the selected
computer CPU has a PS/2 type mouse port rather than
a serial mouse port, the CPU might have gotten “out of
sync” with the mouse.
To Next Page
Loading...
