POWER:
Press and hold the Power button for 2 seconds to turn device on or off.
VOLUME +:
Short press (< 0.5s) the Volume Up + button to turn up volume. Press and hold the + button (3s)
to go to the next track.
VOLUME - :
Short press (< 0.5s) the Volume Down – buttons to turn down volume. Press and hold (3s) the –
button to go to previous track.
INDICATOR LIGHT STATUS:
Power on – When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator – When the speaker is turned on, a flashing blue and red light
indicates the speaker is ready to pair. Once paired, the light will turn solid blue, then turn off.
Power Off - when the speaker is turned off, the indicator light will momentarily turn solid blue,
then turn off.
Battery charging – when speaker is charging, the indicator light will turn solid red. Once the
speaker is fully charged, the light will turn off.
SPEAKER PAIRING:
To pair the speaker:
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds) and look for the small
blinking light.
3. Find the BW LED SPK M speaker in your device’s Bluetooth list, and select.
The device and Bluetooth will find each other every time, so long as the speaker is set to
Bluetooth and your device’s Bluetooth is on. If you’re connecting to a computer, consult with your
owner’s manual on how to sync your computer to Bluetooth.
Auto-off: If the speaker is on but is not connected to Bluetooth, it will shut down after 2 minutes.
To Next Page
Loading...
