Bladelius Embla User Manual
Basic operation - Remove prompt for backup of inserted CD
© 2009 by Bladelius Design Group. All rights reserved
12
Remove prompt for backup of inserted CD
Change the setting “Backup query at CD insertion” in the “CD backup settings”
menu to “No”.
Skip tracks forward and backward
Use the skip forward button to skip track and start playback of the next track.
Use the skip backward button to start playback from the beginning of the track, or
skip to the previous track.
Stop playback of music
Use the “Stop” button to stop playback.
Update Embla software
1. Set the setting “Enable software updates”, in the menu “System settings”
page two, to “On”.
2. Put in the CD with the new software into Embla.
3. Restart Embla (put Embla in and out of standby).
4. Wait for Embla to update itself.
5. The update process is finished when the CD is out and the normal
playback display is shown.
Use random playback mode
Press and hold the “Angle” button on the remote control to toggle random mode
between “All” and “Off”, or change the setting “Random” in the “Playback
settings” menu.
Use repeated playback mode
Press the “Repeat” button on the remote control to toggle repeat mode between
“One” and “Off”, or change the setting “Repeat” in the “Playback settings” menu.
To Next Page
Loading...