Bladelius Embla User Manual
Reference - Audio Settings
© 2009 by Bladelius Design Group. All rights reserved
16
Resampling mode
Options
On *) Resampling is active. Resampling filter is on.
Off Resampling is disabled, and audio bypasses the resampling
filter.
Filter Mode
Filter B and Filter C is optional, and can be purchased separately at your local
dealer.
Options
Filter A *) Dac and filter based on our reference player Bladelius Gondul
M.
Filter B Different DAC than A.
Filter C Analog like digital filter for more analog like sound.
Pre-ringing is an artificial artifact
caused by traditional digital filters.
Humans can be sensitive to this
problem as it doesn’t occur in the real
world. This is the characteristic of Filter
A and Filter B.
Post-ringing is a normal occurrence
in the natural world, for example the
vibration of a drum after it is struck.
This is the characteristic of Filter B2.
Phase
Use this setting to correct some recordings that may be recorded out of phase, or
compensate if system overall is out of phase.
Options
Normal *) Normal phase.
Inverted Phase changed 180°.
To Next Page
Loading...