4
INTRODUCTION
Thank you for purchasing the BLADELIUS Thor amplifier.
Your Thor is a state-of-the-art unit, and has been assembled
by highly skilled BLADELIUS craftsmen to provide you with
many years of listening pleasure. Our unit’s esteem arises
from the way we handle musical signals. BLADELIUS devel-
ops products for people who wish an absolutely natural and
enjoyable music reproduction.
BURN- IN
Due to the extremely advanced circuitry designed and built
into this piece of equipment, a significant “burn-in” period
is required before the unit will reach its maximum sonic
potential.
We recommend the unit be left on (or in standby mode) at all
times, especially during the first 5-6 weeks of operation, in
order to speed the “burn-in” process.
For best results, the Thor should be left on or in the standby
mode at all times. The unit should not be switched off by
removing the power cord unless the unit will not be used for
a significant period of time (during vacations, etc.).
DESIGN
Reduction is the principle for the shaping of all BLADE-
LIUS components. The unobtrusive design harmonizes with
almost every environment and does not compete with your
personal sphere. The form refers to the tonal ability of the
product line, whose composure and strength manifests a
well-balanced equilibrium.
BALANCED SIGNALS
Balanced signal transmission means that two signal lines
are used which carry the same signal with opposite phase.
On the receiving side, the signals are mixed. Since any
noise interference that has arisen during transmission will
be present in both lines with identical phase, such noise
is cancelled out, leaving only the pure original signal. Bal-
anced connection therefore keeps the signal transfer free
from any kind of interference.
To Next Page
Loading...