EasyManua.ls Logo

Bladelius Thor - Unpacking Your Unit; Optimal Unit Placement; Cleaning and Maintenance

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
UNPACKING
When you have received your Thor, you should make sure
that the shipping box is not damaged. If however, that
should not be the case, please contact your dealer. Please
unpack your unit carefully; there are several parts that can
be damaged. We suggest that you to keep your box and
shock absorbers. Save your plastic bag, inserts, and carton.
You may need these later for transporting the Thor or for
shipment in the event it ever requires factory service.
Record the serial number (on rear panel) here for future
reference: ____________________
Please make sure that your shipping box contains the fol-
lowing:
BLADELIUS Thor
Remote control
Power cord
2 LR03 (AAA) batteries (mounted in the remote control)
Owner’s manual
PLACEMENT
The Thor functions best when placed on a flat, stable sur-
face. Never place the Thor near heat sources such as radia-
tors, stoves, fireplaces or other heat-producing appliances.
Avoid placing the Thor where it will be subjected to direct
sunlight or extremely low temperature.
Avoid placing the Thor near strong electromagnetic fields,
such as large power amplifiers. Placement of the unit near
these fields can lead to problems with hum.
CLEANING
To clean the unit, use only a soft tissue (Kleenex type).
Never apply abrasive cleaners to the outer surfaces of the
unit.
Note!
At no time should liquid cleaners be applied di-
rectly to the Thor, as direct application of liquids
may result in damage to electronic components
within the unit.