21
The oven door seal
Periodically check the seal around the
opening of the oven to see whether there is
any damage. If damaged, do not use the
equipment before having it repaired, consult
the nearest service centre and use only
original spares. When cleaning the seal do
not use abrasive objects or substances.
Fig. 9
Replacing appliance components
Prior to undertaking any maintenance work
or replacing the oven light, be sure to
disconnect appliance from the electricity
supply.
Replacing The Oven Light
Push in and turn the glass lid anticlockwise
(Fig.9).
Remove the faulty bulb and replace with one
which is heat resistant to 300°C.
Electric bulb: 15W, 240 V, 50 Hz, 300°C,
E14.
These bulbs are available from your local
Service Centre.
FO 0287
To Next Page
Loading...
