OVEN LAMP REPLACEMENT
Ensure oven is switched off and unplugged before commencing bulb change.
Remove the cooking rack rails by lifting the bottom rail arm over the holding pin. Once this is done, the
cooking rack rail can be removed as one piece, lifting from the bottom to the top.
Remove the glass cover by gently placing a flat head screw driver behind it and levering the cover off.
Doing this will expose the bulb, which is removed by unscrewing the bulb in a clockwise motion.
Once the bulb has been replaced, re assemble in the reverse order to the instructions above.
Type: E 14, Voltage: AC220V-240V, Wattage: 25W, Temperature rating: 300°C
TRANSPORTATION
Keep the original carton of the product and use this packaging if the item needs to be transported. Follow
the transport signs on the carton.
Place a paper between the upper cover and cooking panel, cover the upper cover, than tape to the side
surfaces of oven.
Tape cardboard or paper onto the inside face of the glass as it will be prone to damage from the trays. Use
cardboard covers for the wire grill and trays in your oven. Also tape the oven’s covers to the side walls.
If the original carton is unavailable, take measures to protect the external surfaces (glass and painted
surfaces) of oven against possible blows, as well as the above.
INSTALLATION
The adjacent furniture must be able to withstand a minimum temperature of 100°C. The power
supply to the appliance must be cut off before any adjustments or maintenance work is done on
it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet
your needs in all respects. Make sure to read the manual to obtain successful results so as not to
experience any problems in the future. The information given below contains rules that are necessary for
correct positioning and service operations. They should be read without fail, especially by the technician
who will position the appliance.
To Next Page
Loading...
Need help?
General
