19
The maximum allowed clean time is 3 hours, the minimum 1 hour. The standard time is 1h:
30min, the clock display shows P1:30. At the end of the self-cleaning activity the display shows
P--- steady and flashing. The writing on the display disappears when the mode selector is
placed in the ZERO position. The door remains locked until the oven temperature drops below the
safety threshold, at this time the control unlocks the door.
The cooling fan starts as soon as the function is selected and turns to its higher speed when the
inner parts get hot. The oven temperature is automatically set to 475°C in order to perfectly clean the
cavity.
Fig. 9c
The control also locks immediately the door in order to guarantee the user safety, given that the
temperature inside gets very hot. A lock led (yellow) beside the temperature display shows the
status of the latch mechanism at any time:
- Door unlocked lock led off
- Door locked, lock led
always on.
- Latch moving, transition in progress, lock led
flashing.
To reuse the oven after a pyrolyse, turn the mode selector to ZERO (OFF) position.
Door lock for
children
safety
(p
yr
o)
This is an additional safety functions available only in pyrolityc ovens. The door latch
mechanism that is managed automatically during pyrolyse can be actuated manually by the user
in order to lock the oven door and prevent children from having free access to the oven.
Hold the Time & Temp knob for about 3 seconds to lock/unlock the door manually.
To Next Page
Loading...
Need help?
General
