26
Replacement of the oven
light
W
ARNING
- The oven and
lights
are cool and power to the oven has
been
turned
off before replacing
the light bulb(s). Failure to do
so
could result in
electrical
shock or
burns.
- The lenses must be in place when using the
o
ven.
- The lenses serve to
protect
the light bulb from
breaking.
- The lenses are made of g la ss . Handle c a r e f u l l y
to avo i d
breakage. Broken glass could cause an
injur
y
.
1. Turn off power at the main power supply (fuse or breaker box).
2. Remove the lens (1) by unscrewing it.
3. Remove the light bulb (2) from its socket (3).
4. Replace the bulb (2) with a new one. Avoid touching the bulb with fingers, as oils from
hands can damage the bulb when it becomes hot.
5. Use one with the same Volt and Watt (see Fig. 11).
6. Screw the lens (1) back on.
7. Turn power back on at the main power supply (fuse or breaker box).
To Next Page
Loading...
Need help?
General
