38
Removal of roof tray
The roof tray above the grill element can be removed for cleaning.
- Support the grill element with one hand while removing the wing nuts that hold the element in
in place.
- The element position will drop slightly allowing removal of top liner.
- Once cleaned and dried, the top liner can be placed back into position, above element, and
re-secured with the two wing nuts.
- The liner will only fit into one position so care must be taken to locate it the rear lugs and the
front large lip must be facing downwards.
- Do not use the oven unless the liner is fitted and the element has been re-secured with the
wing nuts.