BB+13
GETTING STARTED
DAB/FM AERIAL
Before using your radio for DAB or FM reception, pull out the telescopic antenna. You may
need to adjust the position of the telescopic antenna for maxing signal strength.
CONNECTING POWER
Before connecting the power, check that the mains voltage on the rating plate of the AC
adaptor is the same as the voltage in your area.
Plug the DC cord from the AC adaptor into the DC jack on the back of the unit.
Plug the AC adaptor into the wall socket and switch the mains power on.
The unit is now ready for use.
NOTE:-The AC adaptor may become warm during operation-this is normal.
When first connected to the power, the clock and calendar display will show “zeros”.
SETTING THE CLOCK
The clock on your radio is automatically set when first used from the time signal broadcast
with DAB radio stations.
If a DAB station is not available, the clock may be set manually via the MENU system. (Please
refer to the page 49).
POWER CONTROL
STANDBY CONTROL
To turn the radio on:
Press the STANDBY button on the top panel.
The display will light and the radio will switch on.
To turn the radio off:
Press the STANDBY button on the top panel briefly.
The radio will switch off. The clock will continue to run whilst mains power is connected.
·
·
·
·
44
To Next Page
Loading...
Need help?
General
