BB+13
INTIAL SCAN
When your radio is switched on for the first time the scanning display will be shown while the
scanning process takes place:
The radio scans all usable stations (full scan) and stores them alphanumerically -1 Radio, 2
Radio, AA Radio, AB Radio…The initial scan will take a few minutes. After the scan, the clock
will be set and the radio will play the name of the first station in the sequence. To browse for
another station, refer to the next section.
BROWSING FOR A STATION
To browse for another DAB station from the front panel controls:
Press the or button.
<Station list> will be displayed.
Press the or button to browse the station list.
Press the SELECT button to select the station displayed.
After s short delay, the radio will tune to the station
ADJUSTING THE VOLUME
To adjust the volume from the front panel controls:
Press the VOLUME + or - button to increase or decrease the volume level.
When the volume is adjusted the display will change to show the current volume setting on a
bargraph.
·
·
·
45
To Next Page
Loading...
Need help?
General
