BB+13
FM SETTINGS MENU
FM SETTINGS MENU
There are also some menu settings that are specific to FM
radio operation. These settings may be changed through the Settings Menu.
To enter the FM Settings Menu:
• Set to FM mode.
• Press the MENU button on the front panel.
A map of the menu is shown below. To scroll through available options, press the or
button repeatedly.
To choose an option from the menu, press the SELECT button.
MORE DETAIL OF THE FM SETTINGS MENU OPTIONS
SCAN SETTING: With this menu option you can set the
Scanning sensitivity of the FM radio to two different levels- “Strong stations only” or “All
stations” .Setting to “Strong stations only” will exclude weaker stations resulting in a quicker
scan. If you set to “All stations” the scan will stop at every station detect, even if the signal is
weak.
AUDIO SETTINGS: This option enables you to set the radio to receive FM in Auto mode
(Mono/Stereo) or in Mono only This may be useful if the signal is weak and the broadcast is
noisy.
SET TIME/DATE: This main option enables the clock to be set manually if there is no available
DAB transmission.
FACTORY RESET: This option will restore all settings to “factory original”. All clock, station lists
and any stored preset stations will be cleared. After factory reset the radio will automatically
re-scan the DAB band.
SW VERSION: This option will display the version number of the control software currently
installed in you radio. This will be helpful to a technician who is servicing the radio.
50
To Next Page
Loading...
Need help?
General
