60
➮ Press the softkey 4 assigned to
the “NAVI” display item to adjust
the volume for navigation systems.
➮ Set the required volume using the
volume control 1.
➮ Press the joystick OK 7 to save
your settings or the MENU button
8 to close the menu without sav-
ing.
Note:
● You can also adjust the volume
during the voice output using the
volume control 1. This setting ap-
plies to the current voice output
and is not saved.
ADJUSTING THE VOLUME
Sound (bass, treble and
X-BASS)
You can adjust the bass, treble and X-
BASS individually for each audio
source.
Adjusting the bass
➮ Press the AUDIO button 9.
“AUDIO 1” appears in the display.
➮ Press the softkey 4 assigned to
the “BASS” display item.
➮ Move the joystick 7 up/right to
boost the bass or move it down/left
to reduce the bass.
When you have finished making your
changes,
➮ press the joystick OK 7 or the
AUDIO button 9.
The settings are saved.
Adjusting the treble
➮ Press the AUDIO button 9.
“AUDIO 1” appears in the display.
➮ Press the softkey 4 assigned to
the “TREB” display item.
➮ Move the joystick 7 up/right to
boost the treble or move it down/
left to reduce the treble.
When you have finished making your
changes,
➮ press the joystick OK 7 or the
AUDIO button 9.
The settings are saved.
SOUND
To Next Page
Loading...
