Blaupunkt Bremen CD72 - Traffic Information; Switching Traffic Information Priority On;Off; Setting the Volume for Traffic Announcements

76
Traffic information
Your unit is equipped with an RDS-EON
receiver. EON (Enhanced Other Net-
work) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Every time a traffic announcement (TA)
is transmitted, you will automatically be
switched from a station that does not
provide traffic information to a station
within the broadcasting network that
does.
Once the traffic report has been played,
you will be switched back to the pro-
gramme that you were listening to be-
fore.
Switching traffic information
priority on/off
➮ Press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
➮ Press the softkey 4 assigned to
the “TRAF” display item.
Traffic announcement priority is active
when a traffic jam symbol is shown in
the display.
Note:
● The TA menu is displayed during a
traffic announcement.
To interrupt the current traffic announce-
ment,
➮ press the softkey 4 assigned to
the “OFF” display item.
If you want to deactivate priority for traf-
fic announcements,
➮ press the softkey 4 assigned to
the “TRAF” display item.
Note:
You will hear a warning sound:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a CD or cas-
sette (depending on the version of
the car radio), you leave the broad-
casting area of a traffic information
station that you are tuned into and
the subsequent automatic search
cannot find a new traffic informa-
tion station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning sound, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮ Press the MENU button 8.
➮ Press the softkey 4 assigned to
the “VOL” display item.
➮ Press the softkey 4 assigned to
the “TRAF” display item.
➮ Set the required volume using the
volume control 1.
➮ Press the joystick OK 7 or the
MENU button 8 to close the
menu.
TRAFFIC INFORMATION