Blaupunkt Bremen CD72 - Subwoofer and Centre Speaker; Selecting the Subwoofer Frequency; Adjusting the Subwoofer Phase

62
Subwoofer and centre
speaker
Selecting the subwoofer
frequency
You can select the frequency at which
you want to drive a connected subwoof-
er. This setting depends on the subwoof-
er being used.
➮ Press the AUDIO button 9.
“AUDIO 1” appears in the display.
➮ Press the softkey 4 assigned to
the “SUB” display item.
➮ Set the correct frequency for your
subwoofer using the joystick 7.
Adjusting the subwoofer boost level
➮ Select the subwoofer frequency as
described above.
➮ Move the joystick 7 up to boost
level (volume) for the subwoofer or
move it down to reduce the level.
When you have finished making your
changes,
➮ press the joystick OK 7 or the
AUDIO button 9.
The settings are saved.
Adjusting the subwoofer phase
You can adjust the phase of the sub-
woofer output to suit your subwoofer.
The phase setting can be set to “0°” or
“180°”.
➮ Press the AUDIO button 9.
“AUDIO 1” appears in the display.
➮ Press the NEXT button 3.
“AUDIO 2” appears in the display.
➮ Press the softkey 4 assigned to
the “SUBP” display item.
➮ Use the softkey 4 that is assigned
to the “SUBP” display item to
switch between the 0 and 180 de-
gree phase settings.
When you have finished making your
changes,
➮ press the joystick OK 7 or the
AUDIO button 9.
The settings are saved.
SUBWOOFER AND CENTRE SPEAKER