Cassette deck operation
Cassette playback
Insert the tape into the slot with the open
side showing to the right. “CASSETTE” will
appear in the display. The tape will play in
the direction “TAPE 1”.
If a tape is already inside, press SRC to
select “CASSETTE” mode. The tape will
play in the direction last selected.
The number of tracks to be skipped will
appear in the display and count down until
the track selected has been reached.
Press QD or
cc
I
>>
to stop the function.
If you have activated “Radio Monitor ON”,
the unit will play the radio station last se-
lected while the tape is winding. You can
alter the Radio Monitor setting in DSC
mode.
Reversing the tape
Repeat song tracks
Press
dD
to change the tape direction
dur-
ing cassette playback from TAPE1 to
During tape playback press
4IRPT.
“RPT”
TAPE2 or vice versa:
will light up in display field 3; “REPEAT-T’
At the end of the tape, the unit will auto-
will appear briefly in display field 2. While
matically switch to the opposite side.
the tape is rewinding, “REWIND-T” will
ap-
pear in the displav. The track playing will
Skipping cassette tracks
repeat until you press 4/RPT again. “RPT”
will disappear from the disolav.
CPS stands for Cassette Program Search
Playback will now continue normally.
and allows you to skip over songs on the
If you have activated “Radio Monitor ON”,
tape.
the unit will play the radio station last se-
The tracks must, however, be separately
lected while the tape is winding. You can
by at least 3 seconds of blank tape.
alter the Radio Monitor setting in DSC
During tape playback press either A or V
,
mode.
on the rocker switch to activate the CPS
mode. “CPS
FF”
or “CPS FR” will appear
in the display. Press the button A/V repeat-
edly to skip the corresponding number of
tracks in either direction.
Scan
To scan all of the songs on a tape, press
SCA. “SCAN” will appear in the display.
All of the tracks on the tape in the tape deck
will be scanned briefly one after the other.
Press SCA again to switch the SCAN func-
tion off. The track currently playing will con-
tinue to play.
Fast winding
Use the rocker switch to fast forward or re-
wind the tape during cassette operation:
>>
forward
<<
rewind.
“FORWARD” or “REWIND” will light up in
the display.
Press the button indicating the opposite
directiondb,
or
A/v
to stop the function.
If you have activated “Radio Monitor ON”,
the unit will play the radio station last se-
lected while the tape is winding. You can
alter the Radio Monitor setting in DSC
mode.
Tape type selection
If you are playing METAL or
00,
cassettes,
press MTL. “MTL” will then light up in dis-
play field 1.
14
To Next Page
Loading...
