EasyManua.ls Logo

Blaupunkt Colorado CM 168 - MIX; Rpt; Scan; Selecting a Track

Blaupunkt Colorado CM 168
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A I v
CD selection
A
UP
V
Down
CD Select-By-Name
If you have named a CD and it has been
selected at least once since the magazine
was inserted, the name is seen immediate-
ly, so that you can easily find the desired
CD.
Selecting a track
>>
Up: Press briefly.
CUE
-
fast advance (audible): Hold button
down.
<<
Down: Press two or more times briefly.
To
re-start
a track: Press briefly.
REVIEW -fast reverse (audible):
Hold button down.
When at start of first track, unit goes to last
track on same disc.
Press the button repeatedly to skip several
tracks.
The number of the selected track will ap-
pear beside
‘7”
(track).
RPT
CD tracks can be played repeatedly.
The following options are available:
-
Repeat the current track (“REPEAT-
T”)
or
-
Repeat the CD, i.e. all tracks on the
current disc (“REPEAT-D”).
“RPT” will appear in display field 3 as long
as RPT is active. “REPEAT-T” will light
up
briefly in display field 2 when you activate
this function and each time the track chang-
es. “REPEAT-D” will show when a CD is
repeated.
Switch REPEAT-T on:
l Press 4lRPT briefly.
Switch REPEAT-D on:
l Hold 4/RPT down for longer.
To stop repeat functions, press
WRPT.
MIX
You can have the CD tracks played in ran-
dom order.
The following options are available:
-
Mix all tracks of one CD (“MIX-CD”) or
-
Mix all tracks of all CDs (“MIX-ALL”) in
manner determined by the CD chang-
er model.
“MIX” will appear in display field 3 as long
as the MIX function is active.
“MIX-CD” or “MIX-ALL” will light up briefly
in display field 2 when you activate this
function and each time when the track chan-
ges.
Switch MIX-CD on:
l Press 5/MIX briefly.
Switch MIX-ALL on:
l Hold 5/MIX down for longer.
To stop mix functions, press 5/MIX again.
SCAN
Use this function to scan all of the CD
tracks.
To start the Scan function:
l Press SCA, “SCAN” will appear in the
display.
All tracks on the CD will be scanned one
after the other in ascending order.
To stop the Scan function:
l Press SCA briefly.
The track currently scanned will continue
to play.
16

Table of Contents

Related product manuals