Blaupunkt Colorado CM 168 - Thummertm III Remote; Control Operation (Optional)

@ Preset Scan
Press PS. “PS Scan” will appear in
the display, followed by the station
symbol (flashing).
The stations stored onthe station pre-
set buttons and within reception range
will be scanned.
You can set the scan time in DSC pro-
gramming.
To stop Preset Scan:
l Press PS again.
@ SCA Scan
Scans radio stations or song titles/
tracks.
You can set the scan time in DSC pro-
gramming.
Radio mode
Press SCA briefly.
All of the FM or AM stations within re-
ception range will be scanned.
“SCAN” will appear in the display, al-
ternating with the radio station cur-
rently being scanned (flashing).
To stop Scan:
Press SCA again
.
Cassette mode
Press SCA briefly.
“SCAN” will appear in the display.
All of the tracks on the cassette will be
scanned.
8
To stop Scan:
Press SCA again
Changer mode
Press SCA briefly.
All of the CD tracks will be scanned.
“SCAN” will appear in the display.
To stop CD scan:
Press SCA again.
ThummeP III Remote
control operation (optional)
General
SRC
Press briefly: change the audio
source
fl
Press briefly: muting
v+ Higher volume
V-
Lower volume
Radio mode
A
Seek tuning upwards
V
Seek tuning downwards
>>
Next preset station upwards
<<
Press briefly: select the wave-
band
Hold down: Travelstore
Cassette mode
A
Select track (CPS) upwards
V
Select track (CPS) downwards
>> Fast forward
z
Fast rewind
Hold down: reversing the tape
CD changer
A
Next CD
V
Previous CD
>>
Press briefly: next track
Hold down: cue
<<
Press briefly: previous track
Hold down: review
SRC
Hold down: access to list mode