English
39
Setup
Language English
TT Language West
Audio Language English
Subtitle Language English
Hearing Impaired Off
PVR File System
Aspect ratio auto
Blue Screen ON
First time installation
Reset
Software Update (USB)
HDMI CEC
Move Return
MENU
Select
OK
EXIT
EXIT
SETUP
Language - Allows you to change the language of the menu.
TT Language - Encoding settings for the proper display of
teletext characters.
Subtitle Language -
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be displayed by pressing the
“Subtitle”. If you set a Hearing Impaired on and switch to a
channel with support for hearing impaired subtitles will be
activated automatically.
PVR File System - Checks the le system of the connected USB
device and displays the information about the check results.
Aspect Ratio - Within the EU the picture format varies
depending on the channel/broadcast. There are a number of
di erent options to best meet your needs.
Auto Automatically displays the best picture
format. So the picture is in the correct
position. May have black lines at the top/
bottom and/or sides.
4:3 Displays the 4:3 picture in its original size.
Side bars are shown to ll the 16:9 screen.
16:9 Fills the screen with a regular 16:9 signal.
Zoom 1/2 The picture is the correct proportion but
zoomed in to ll the screen.
Full Screen Stretch signal to ll the screen.
Blue Screen - Changes the background when there is no input
between clear and a blue background (Only available on some
sources).
First Time Installation -
Reset - This resets the menus to factory settings.
Software Update (USB) - From time to time we may release
new rmware to improve the operation of the television
(available to download). This menu lets you install the new
software/ rmware onto the television. Further details of how to
do this will be issued with the rmware. Contact the helpline or
refer to the ‘product support’ section of the website.
HDMI CEC - Allows you to operate devices conected via HDMI
with TV remote control.
Auto power - Atomatically turn on/o conected devices
via HDMI CEC
Device menu - Allows you to acess devices menu and
operate the menu using TV remote control.
HDMI ARC - Sends audio signal from terrestrial/satellite
broadcast via HDMI to the AV receiver without using any
additional audio cables, this functions is available only on
HDMI 2 output.
HDMI CEC must be supported on connected devices.
TV Menu operation
Setup
To Next Page
Loading...
Need help?
General
