Blaupunkt Hamburg MP68 - CD Mode (Audio); Starting the Audio CD Mode; The Audio CD Display; The CD Menu

CD mode (audio)
Audio CDs are played in the CD mode (au-
dio). How to insert and remove CDs is de-
scribed in the chapter "Startup".
Starting the audio CD mode
You can select an inserted CD as audio
source:
.... Press the SRC button ® repeatedly
until "CD" appears on the display.
The playback starts.
Note:
As long as the CD is in the drive, the de-
vice stores track and playing time of the
previously played CD. After calling up
the audio source, the playback starts at
the point where it was interrupted.
The audio CD display
~
® Bluetooth status
® Display area for track number and CD
text (album, artist, track name if availa-
ble and switched on)
CD mode (audio)
© Random playback (MIX) or repeat func-
tion (RPT)
@ Playing time ortime
The CD menu
The CD menu provides functions such as
MIX and REPEAT (see the lower table on the
next page).
To select a function and its desired option in
the CD menu,
.... press the MENU button 0.
The CD menu opens .
....
To select the desired function, press the
rocker switch 7\ or v @.
.... Press the OK button 0.
.... Press the> rocker switch @ to switch
on the selected option, or the < rocker
switch @ to switch if off.
....
Press the OK button 0 to select a dif-
ferent function, or press the DIS/ESC
button @to exit the menu.
23