Blaupunkt Hamburg MP68 - Switching the Continuous Colour Change for the Display Illumination On;Off (con SCAN); Changing the Scan Time (SCANTIME)

User settings
Switching the continuous colour change
for the display illumination on/off
(CON SCAN)
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the system menu.
.... In the System menu, press the rocker
switch 1\ or v @ repeatedly until the
"CON SCAN" menu item is selected.
.... Press the OK button ® to call up the
menu item.
.... Switch between the settings with the
rocker switch < or > @.
- > "CONTINUOUS COLSCAN" DJ:
Colour change is on.
- < "CONTINUOUS COLSCAN" 0:
Colour change is off.
....
Press the OK button ® to select a dif-
ferent function, or press the DIS-ESC
button @ to exit the menu.
58
Changing the scan time
(SCANTIME)
The scan time of the SCAN function can be
adjusted in the System menu for all audio
sources between 5 and 30 seconds.
.... In the System menu, press the rocker
switch 7\ or ~ @ repeatedly until the
"SCANTIME" menu item is selected .
....
Press the OK button CD to call up the
menu item.
The current setting is displayed .
....
Use the rocker switch < or> @ to
select the desired setting in 5-second
increments between 5 and 30.
.... Press the OK button CD to select a dif-
ferent function, or press the DIS-ESC
button @ to exit the menu.