Blaupunkt Hamburg MP68 - Changing the Day;Night Brightness (D-Day;D-NIGHT); Mixing the Color for the Display Illumination (DISP COL); Selecting the Colour of the Display Illumination from the Colour Scan (COL SCAN)

Changing the day/night brightness
(D-DAY /D-NIGHT)
The device automatically switching to night
mode if you turn on the light of your vehicle.
For this purpose, the device must be con-
nected with your vehicle via a correspond-
ing connection as described in the installa-
tion instructions.
You can adjust the display brightness sepa-
rately for day and night.
.... In the System menu, press the rocker
switch A or v @ repeatedly until the
menu item IID-DAY
II
(day brightness) or
IID-NIGHT
II
(night brightness) is
selected .
....
Press the OK button 0to call up the
menu item.
The current setting is displayed.
.... Use the rocker switch < or > @ to
select the desired setting between 1
and 16.
....
Press the OK button 0 to select adif-
ferent function, or press the DIS-ESC
button @to exit the menu.
Mixing the color for the display
illumination (DISP COL)
To customise the display illumination to suit
your tastes you can mix a colour yourself us-
ing the three primary colours red, green and
blue (RGB) .
....
In the System menu, press the rocker
switch A or v @ repeatedly until the
IIDISP COLli menu item is selected .
....
Press the OK button 0 to call up the
menu item.
User settings
The current settings for IIGREEN
II
, IIRED
II
and
IIBlUEII are displayed .
....
Select a colour with the rocker switch A
or
V
@.
.... Adjust the value for the selected col-
our with the rocker switch < or> @ be-
tween 0 and 16.
After you adjusted all colours as desired,
.... press the OK button 0 to select adif-
ferent function, or press the DIS-ESC
button @ to exit the menu.
Selecting the colour of the display
illumination from the colour scan
(COL SCAN)
During the colour seek, the colour of the dis-
play illumination changes continuously, and
you can select the current colour.
.... In the System menu, press the rocker
switch A or V @ repeatedly until the
IICOl SCANII menu item is selected.
.... Press the OK button 0 to call up the
menu item.
The colour seek is started. IIAUTO COlOR-
SCAN
II
appears on the display.
.... Press the OK button 0 to select the
current colour, or press the DIS-ESC
button @ to cancel the colour seek
without selecting a new colour.
57