Blaupunkt Hamburg MP68 - Functions in CNC Mode

C'n'C mode
Functions in C'n'C mode
The functions of the following table can be called directly on the C'n'C display by touching
a button.
Press the rocker switch
<or>@.
Press and hold the
rocker switch < or >
@.
-~~--_._-'"----'
Press the OK button CD
for longer than 2 sec-
onds.
The functions of the following table can be called up in the C'n'C menu. For further details.
please read the following section. "The C'n'C menu".
1 Option is only available if CD changer is connected via C'n'C interface.
2 Option is only available if iPod® is connected via C'n'C interface.
30