Blaupunkt Hamburg MP68 - Ending Acall; Redirecting an Ongoing Phone Call to the Cell Phone; Storing and Calling a Phone Number in the Phone Book of the Device; Storing Phone Numbers

Bluetooth phone call
To enter a phone number and make a call,
.... open the Bluetooth menu .
....
Press the rocker switch 7\ or Y: @ until
the "DIAL NEW" menu item is selected.
.... Press the OK button CD to call up the
menu item.
Now you can enter a phone number:
.... Enter the number sequence by press-
ing the corresponding buttons of the
keys@.
After entering one digit, the device auto-
matically switches to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch <
or>@again.
After entering the complete phone number,
.... press the ~ button @ to make the
call.
The display shows ICALLlNG" and the di-
aled phone number or its entry in the phone
book.
Ending a call
To end a call,
.... press the'" button @.
The display shows "CALL ENDED".
You can also end the phone call by switching
off the device.
44
Redirecting an ongoing phone
call to the cell phone
By default, the voice of the person calling
you is played back via the loudspeakers of
the vehicle during a phone call. You can also
redirect a phone call to your cell phone:
.... Briefly press the ~ button @.
The loudspeakers in the vehicle are muted
and the voice of your caller is redirected to
your cell phone. Pressing the ~ button
again outputs the voice again via the loud-
speakers in the vehicle.
OR
.... Press the On/Off button ® for longer
than 2 seconds.
The car sound system is switched off and
your caller is redirected to your cell phone.
Storing and calling a phone
number in the phone book of the
device
The device features its own phone book in
which you can store 10 entries. Every en-
try consists of a name and a phone number.
The numbers stored in the phone book of
the device are available independent of the
currently connected cell phone.
Storing phone numbers
To store an entry in the phone book of the
device,
.... open the Bluetooth menu .
....
Press the rocker switch 1\ or v @ until
the "RAD PBK" menu item is selected.