Blaupunkt Hamburg MP68 - Managing Several ConC Devices

... Press the OK button 0 to call up the
menu item ..
... Switch between the settings with the
rocker switch < or > @.
- > "MIX AUXIID1: On.
- < "MIX AUX" 0: Off.
... Press the OK button 0 to select a dif-
ferent function, or press the DIS-ESC
button @to exit the menu.
Managing several C'n'C devices
Note
This setting is omitted if the current soft-
ware of this device does not yet offer any
C'n'C support.
When using suitable adapter cables, you
can connect up to 3 C'n'C Blaupunkt inter-
faces to the device. For the device to distin-
guish the different interfaces, you can as-
sign them individual device numbers .
... Press the MENU button 0 .
... Press the < rocker switch @ to open
the "Syst" system menu .
... Press the rocker switch 1\ or ~ @ until
the "C'N'C EDIT' menu item is selected .
... Press the OK button 0 to call up the
menu item.
The menu displays the 3 C'n'C devices "DE-
VICE 1" to "DEVICE 3" .
....
Select a device with the rocker switch
7\or~@ .
.... Press the OK button 0.
AUX mode
You can now enter the four-digit PIN number
of the device:
... Enter the number sequence by press-
ing the corresponding buttons of the
keys@.
Note:
The PIN of a C'n'C device consists of
4 hexadecimal digits. Every digit can
take on 16 different values from 0 to 9
and A to F. To enter the values from A to
F for adigit, press the "2" or "3" button
of the keys as often as required.
After entering one digit, the device auto-
matically switches to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch <
or>@again.
After entering the complete PIN number,
... press the OK button 0.
39