Operating the tuner
90
Toggle between mono and stereo
operation ( Mono)
If you selected the "FM" wave-
band, you can toggle between
mono and stereo operation.
Press the softkey 9 in the
"Tuner" menu (next to "Mono").
: The mono operation is
activated. Weak, noisy sta-
tions are played back more
clearly.
: The stereo operation is
activated. You are listening in
stereo if the station broad-
casts in stereo.
Note:
If you switch on the device, this
setting is automatically set to
stereo operation.
Switching the display of radio
text on/off ( Radio Text)
Press the softkey
< in the
"Tuner" menu (next to "Radio
Text").
: The radio text display is
switched on. Radio text is
displayed on info line 3
I of
the tuner display, provided
that the station broadcasts
radio text.
: The radio text display is
switched off.
➔
•
•
➔
•
•
Allowing alternative frequencies
( RDS)
The device can automatically
switch to an alternative frequency
(AF) of the same station if the re-
ception becomes poor.
Press the softkey
; in the
"Tuner" menu (next to "RDS").
: The device automatical-
ly adjusts the best receivable
frequency of the station, pro-
vided that the station sup-
ports the "AF" RDS function.
: The device does not
change the frequency.
Searching FM stations automat-
ically and storing them in the
FMT memory bank ( Travelstore)
You can automatically store the
six FM stations offering the
strongest reception in the region
in the FMT memory bank.
Press the softkey
: in the
"Tuner" menu (next to "Travel-
store").
"Travelstore" appears on the
display. The tuner automatical-
ly searches for the six strong-
est FM stations and stores
them in the FMT memory bank.
After the storing is completed,
the radio plays the station at
memory location 1 of the FMT
level.
➔
•
•
➔
02_BA_Memphis_EU_eng.indd Tuner9002_BA_Memphis_EU_eng.indd Tuner90 03.05.2006 10:44:05 Uhr03.05.2006 10:44:05 Uhr
To Next Page
Loading...
Need help?
General
Weight and Dimensions
