Changing basic settings in the settings menu
114
selected folder with the BMP
fi les of the animation.
The "Picture Download" menu
appears.
Press the softkey next to the
image or the animation to be
replaced.
"Clock" replaces the wallpa-
per which appears if the ra-
dio is switched off and the
vehicle ignition is switched
on,
"Minimal Mode" replaces the
screen saver,
"Aux" replaces the wallpaper
which appears if "AUX" is se-
lected as audio source.
A progress bar illustrates the
transfer of the fi le. As soon as
the fi le has been transferred,
the display of the active au-
dio source appears. Your image
or animation now replaces the
factory setting.
Adjusting the display viewing
angle (Angle)
The angle at which the driver
looks at the display is depend-
ent upon, among other things,
the installation position of the de-
vice, the seating position, and the
physical size of the driver. You
can adjust the display contrast to
your viewing angle as follows.
➔
•
•
•
Press the softkey : (next to
"Angle").
The "Angle" menu opens and
the current display contrast is
shown.
On the rocker switch
3,
press
or to increase the
display contrast.
On the rocker switch
3,
press
or to decrease the
display contrast.
You can adjust the display con-
trast in 13 increments from
–6 to +6.
➔
➔
➔
02_BA_Memphis_EU_eng.indd Menü11402_BA_Memphis_EU_eng.indd Menü114 03.05.2006 10:44:11 Uhr03.05.2006 10:44:11 Uhr
To Next Page
Loading...
Need help?
General
Weight and Dimensions
