63
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
The next receivable station correspond-
ing to your selected programme type will
then be tuned into.
If the tuner does not find a station that
corresponds to the selected programme
type, you will hear a beep and “NO PTY”
appears briefly in the display. The radio
will then retune to the station that it re-
ceived last.
Note:
If you want to switch back to the pro-
gramme types display,
➮ open the second page of the radio
functions menu again and press
the softkey 5 assigned to the
“PROG TYP” display item.
Optimising radio reception
Treble reduction feature during
interference (HiCut)
The HiCut function has the effect of re-
ducing interference noise during poor
radio reception. If interference occurs,
the system automatically reduces the
treble thus reducing the interference lev-
el.
Setting HiCut
➮ Press the TUNER button = while
in radio mode.
The first page of the radio functions
menu is displayed.
➮ Press the NEXT button 4.
➮ Repeatedly press the softkey 5
assigned to the “HIGH CUT” dis-
play item until the setting that you
want appears in the display.
“HICUT 0” means that no automatic re-
duction of the treble and interference
level will be made; “HICUT 2” means
that a maximum reduction will be made.
➮ Press the joystick OK 8 or the
TUNER button = to close the
menu.
The settings are saved.
Activating/deactivating the radio
text display
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
dio texts. You can allow radio texts to
be displayed or you can block them.
➮ Press the TUNER button = while
in radio mode.
The radio functions menu appears in the
display.
➮ Repeatedly press the softkey 5
assigned to the “R-TEXT” display
item until the “RADIO TEXT ON” or
“RADIO TEXT OFF” setting that
you want is displayed.
➮ Press the TUNER button = or the
joystick OK 8.
The settings are saved.
RADIO MODE
To Next Page
Loading...
Need help?
General
