Blaupunkt Seattle MP74 - Device Information and Reset Procedures; Displaying the Device Serial Number; Resetting Device to Factory Defaults

84
Displaying the serial
number
You can display the device’s serial
number.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VARIOUS” display item.
➮ Press the softkey 5 assigned to
the “SER NUM” display item.
The device’s serial number will be dis-
played in the top line of the display.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
Resetting the device
You can reset the device to its factory
default settings. All custom settings will
then be cleared.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VARIOUS” display item.
➮ Press and hold down the softkey
5 assigned to the “NORMSET”
display item for longer than two
seconds.
The device will switch off and then back
on again automatically.
SERIAL NUMBER RESETTING