76
Displaying the clock time
continuously
You can make the system display the
clock time when the device is off and
the vehicle ignition is on.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “CLOCK” display item.
➮ Press the softkey 5 assigned to
the “OFFCLOCK” display item.
“SHOW CLOCK” means that the clock
time will be displayed; “HIDE CLOCK”
means it will not be displayed.
Equalizer
This device is equipped with a DEQ Max
digital equalizer. It provides you with
three self-calibrating 5-band equalizers
and five sound presets.
The EQ1 - EQ3 equalizers can be cali-
brated automatically with the help of the
special calibration microphone (only in-
cluded with the Los Angeles MP74). If
you like, you can then adjust the auto-
matically ascertained values manually.
Furthermore, you can also configure all
of the equalizer settings manually.
The following bands are available:
● LOW 1 20 - 250 Hz
● LOW 2 20 - 250 Hz
● HIGH 1 320 - 20 000 Hz
● HIGH 2 320 - 20 000 Hz
● HIGH 3 320 - 20 000 Hz
You can adjust the level for one frequen-
cy of a band in steps of 25 ranging from
-12 dB to +12 dB. In addition, you can
set the quality factor “Q” in three steps
ranging from 1 to 3.
CLOCK TIME EQUALIZER
To Next Page
Loading...
Need help?
General
