64
If you want to deactivate priority for traf-
fic announcements in general,
➮ press the softkey 5 assigned to
the “TA OFF” display item.
Note:
You will hear a warning beep:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a CD, you
leave the reception area of a traffic
information station that the system
is tuned into, and the subsequent
automatic search cannot find a
new traffic information station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VOLUME” display item.
➮ Press the softkey 5 assigned to
the “TRAFFIC” display item.
➮ Set the volume level that you want
using the volume control 2.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
Traffic information
Your device is equipped with an RDS-
EON receiver. EON (Enhanced Other
Network) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does. Once
the traffic report has been played, the
system will switch back to the pro-
gramme that you were listening to be-
fore.
Switching traffic information
priority on/off
➮ Press the TUNER button = while
in radio mode.
The radio functions menu appears in the
display.
➮ Repeatedly press the softkey 5
assigned to the “TRAFFIC” display
item until the “TRAFFIC INFO ON”
or “TRAFFIC INFO OFF” setting
that you want is displayed.
Note:
The TA menu is displayed during a traf-
fic announcement.
To interrupt the current traffic announce-
ment,
➮ press the softkey 5 assigned to
the “TA EXIT” display item.
TRAFFIC INFORMATION
To Next Page
Loading...
Need help?
General
