Blaupunkt TravelPilot Lucca MP3 - Working with the Map; Map Operation; Showing a Map; Touching the Map

53
Working with the Map
Map Operation
In this section you learn which in-
formation and which processing op-
tions are available in the map view.
Depending on whether you display a
map without or during the navigation,
different options are available for op-
eration.
Showing a Map
You can display the map
• during route planning,
• to display destinations on the
map, or
• to copy destination from the map
for the navigation.
You can open the map view as fol-
lows:
• Via the Show map button in the
Navigation menu.
• Via the Select on map button in
the Destination entry menu.
• Via the Show on map button in the
additional functions in the Address
menu after selecting a destina-
tion.
Touching the Map
➜ Briefl y touch the map to display
additional functions.
Depending on whether you are cur-
rently in an active navigation or only
display the map, only certain func-
tions are available.
➜ Touch the map for a few seconds
to display information about the
location you touched, and you can
also select it as navigation desti-
nation.
For further details, please read
the section "Copying a Destination
from the Map".
Working with the Map
Lucca_long_2G_eng.indd 53Lucca_long_2G_eng.indd 53 13.04.2006 11:53:50 Uhr13.04.2006 11:53:50 Uhr