73
➜ Touch the Warning outside built-
up areas button to change the
value or to set it to Never.
• Warning
➜ Activate the Warning button to re-
ceive an audible warning.
Note:
This information can only be dis-
played if it is part of the map ma-
terial.
Caution:
The information in the map material
may be incorrect due to short-term
changes (construction, etc.)!
The traffi c situation and the local
signpost information have priority
over the information of the naviga-
tion system.
Volume
In the Volume menu, you can set the
volume.
➜ For this purpose, touch the Vol-
ume fi eld and select a different
value.
Touchscreen Calibration
In the Touchscreen calibration menu,
you can recalibrate (align) the touch-
screen if it responds imprecisely to
touches.
➜ Touch the Start calibration button
and follow the instructions on the
display.
Auto Mode
In the Auto mode menu, you can per-
form the following settings:
• Begin with
– Select whether the map should
be displayed in 3-D view or in
2-D view by default.
Confi guring Lucca
Lucca_long_2G_eng.indd 73Lucca_long_2G_eng.indd 73 13.04.2006 11:53:58 Uhr13.04.2006 11:53:58 Uhr
To Next Page
Loading...