66
Supposing that you are on the mo-
torways and hear a traffi c announce-
ment on the radio about a traffi c jam
of 5 km on your route. In this case,
you can use a manual blocking of the
section to evade the traffi c jam.
The manual blocking is only applica-
ble to the current navigation and is no
longer available for a new navigation
or after a restart of the program.
Route segments are blocked as fol-
lows:
Prerequisite:
•
You are in the map display during
a navigation.
➜ Briefl y touch any position on the
map.
➜ Select the Block road entry.
The Block road menu displays.
➜ Enter the number of kilometres,
starting with your current posi-
tion, which you want to block.
The route is recalculated and the
blocked route segment is evaded.
The blocked segment is marked in
red.
Unblocking
➜ Briefl y touch any position on the
map.
➜ Select the Block road entry.
The road blocking is cancelled and
the navigation uses once again the
original calculated route.
Additional Functions during Navigation
Lucca_long_2G_eng.indd 66Lucca_long_2G_eng.indd 66 13.04.2006 11:53:55 Uhr13.04.2006 11:53:55 Uhr
To Next Page
Loading...