65
➜ Touch the Interim destination
button.
The Destination entry menu dis-
plays.
➜ Enter the place of destination as
described in "Entering a Destina-
tion".
➜ Touch the Set as route point but-
ton.
The route is recalculated and the
defi ned interim destination is se-
lected as the next route point.
Note:
You can also select the interim
destination directly from the map
as described in the section "Copy-
ing a Destination from the Map".
Next, touch Interim destination.
Approaching the Next
Destination
This function is only available during
a navigation on a route with at least
one interim point.
Use this function if you want to skip
the next route point.
➜ Touch the Next destination but-
ton to approach the next to one
route point.
The route is recalculated so that
the next to one route point can be
approached as the next destina-
tion.
Blocking route
segments
Manual Blocking
You have the option of manually
blocking a route segment located on
your route to evade the road section
blocked for navigation. After a manual
blocking, the route is recalculated.
Additional Functions during Navigation
Lucca_long_2G_eng.indd 65Lucca_long_2G_eng.indd 65 13.04.2006 11:53:55 Uhr13.04.2006 11:53:55 Uhr
To Next Page
Loading...