Blaupunkt TravelPilot Lucca MP3 - Confi Guring Lucca; Basic Settings; Settings; Factory Settings

70
Confi guring Lucca /
Basic Settings
Settings
You can perform settings in the Lucca
for the following areas:
• Touchscreen calibration
• Factory settings
• Map information
• Route information
• Signpost information
• Speed
• Volume
• Touchscreen calibration
• Auto mode
• Routing options
• Route planning
• Time zone
• Format
• TMC
• Home address
• Voice output
• Product information
• Language
➜ In the Navigation menu, touch the
Settings menu to confi gure the
Lucca.
➜ If you made changes to the set-
tings, you can touch the OK button
of the Settings menu to accept the
changes you made.
Or
➜ Touch the
button to exit the
Settings menu without saving the
changes.
Factory Settings
In the Factory settings menu, you can
reset the navigation software to the
factory settings.
➜ Touch the Factory settings but-
ton.
A confi rmation is displayed.
➜ Confi rm the reset to the factory
settings by touching OK.
To avoid resetting the device,
➜ touch the
button.
Confi guring Lucca
Lucca_long_2G_eng.indd 70Lucca_long_2G_eng.indd 70 13.04.2006 11:53:57 Uhr13.04.2006 11:53:57 Uhr