Blaupunkt TravelPilot Lucca MP3 - Time Calculation; Units of Measure; Formats; Language; Tmc

75
Time Calculation
In the Time zone menu, you can set
the time zone that is valid for your
position. This setting is important for
the correct calculation of estimated
arrival times.
• Time zone
➜ Touch this fi eld to set the time
zone valid for your position.
• Daylight saving time
➜ Touch this fi eld to toggle between
daylight savings time (button with
check mark) and winter time (but-
ton without check mark).
Note:
If the time is changed at your loca-
tion or if you drive into a different
time zone, you must adjust the
corresponding settings.
Units of Measure / Formats /
Language
In the Format menu you can specify
which units of measure should be
used for times and distances and the
language to be used for the menus
and voice output of the Lucca.
• Time
➜ Touch this fi eld to toggle between
12-hour and 24-hour display.
• Distance
➜ Touch this fi eld to toggle between
the display in kilometres and
miles.
• Language
➜ Touch this fi eld to select among
the available languages.
TMC
In the TMC menu you can specify
whether the Lucca should automati-
cally perform route changes in case
of traffi c obstructions or wait for
manual confi rmation.
Note:
A detailed description of the TMC
functionality can be found in the
chapter "Using the TMC Function-
ality".
Confi guring Lucca
Lucca_long_2G_eng.indd 75Lucca_long_2G_eng.indd 75 13.04.2006 11:53:58 Uhr13.04.2006 11:53:58 Uhr