55
– Position fi xed (standard set-
ting)
In this mode (button pressed),
the map is continually moved
so that the current position
(yellow arrow) is always closely
centred in the bottom third of
the map.
• Zooming / Moving
– Touch the Zoom /Pan
, button to switch between
zoom and pan mode.
– Zoom
In the zoom mode (button not
pressed), you can zoom in and
out on the map. You can zoom
in by plotting a diagonal start-
ing in the top left corner. You
can zoom out by plotting a di-
agonal starting in the bottom
right corner.
– Move
In the move mode (button
pressed), you can move the
map. For this purpose, touch
the map, hold the pen or your
fi nger pressed and move the
map area in the desired direc-
tion.
• Showing the complete route
– Touch this button to dis-
play the complete route on the
map.
• Map in travel direction / Map
to north
– Touch the In travel direction
/ To north button to
toggle the map view between
travel direction and aligned to
north.
– Align map to north
Touch this button (button not
pressed) to align the map in the
direction north.
– Map in travel direction
Touch this button (button
pressed) to align the map in the
travel direction.
• 3D-view
– Touch this button to display
the map in a three-dimensional
representation from a bird's
eye view.
Working with the Map
Lucca_long_2G_eng.indd 55Lucca_long_2G_eng.indd 55 13.04.2006 11:53:51 Uhr13.04.2006 11:53:51 Uhr
To Next Page
Loading...