13
• Set SIM name
In this menu, you can set a unique name instead of preinstalled SIM1 and SIM2 names.
CALL FORWARDING
To forward a call, in Menu mode, go to [Menu > Setting> Call Settings > Call Divert]. Select which SIM card
settings you want to change.
Select the type of forwarding (unconditional, if busy, if no answer, if unavailable), then press <OK>, then
<Activate>. Enter the forwarding number and press <OK>.
To delete diverts, in Menu mode, go to [Settings> Call settings > Call divert], then select <Cancel all diverts>.
CALL WAITING
If supported by the network, you can receive a second call during a conversation (Call Waiting function). You
can deactivate the call waiting function in the device: [Menu > Settings > Call settings > Call waiting]
(Activate / Off / Check status).
CALL BARRING
If supported by the network provider, it is possible to block the following calls: All outgoing calls, All incoming
calls, Incoming calls when roaming, ISD calls, Dial when INTL roaming. For more information, please contact
your network provider.
HIDE ID
You can change the display setting of your own number in [Menu > Settings > Call settings > Hide ID] after
selecting the SIM card:
• Hide ID – the phone number is not visible at the side of the called party
• Display own ID – the phone number is visible at the side of the called party
• Display ID by network – the device sends the identifier to the called party according to the network
settings: if the phone number is hidden by the network, it will not be displayed to the called party either; if
it is network-enabled, it will appear on the called party.
SPECIAL SETTINGS
In menu mode, go to [Menu > Settings > Call settings > Others], where you can make the following settings:
● Call time minute reminder
In this menu, you can set the device to sound a warning about the time that has passed during the call: you
can choose between 50, 55 and 60 seconds or you can also set an individual time (between 0 and 60
seconds).
● Automatic redial
If the function is active, the device automatically redials the called number if the called party does not
answer the call. Note: dialing is interrupted if the call is answered by voicemail or answering machine.
● Answer/Reject mode
You can find a detailed description of the function in the Receive a call menu.
To Next Page
Loading...
