Blaupunkt V18 - FM Radio; Profiles

16
FM RADIO
In menu mode, go to the FM Radio menu item. For radio, connect the earphone, which functions as an
antenna. The radio also works without headphones.
In the FM radio application, press the left/right navigation buttons to automatically search
forward/backward for channels. Use the up/down navigation keys to increase/decrease the radio volume.
Auto search and save
By selecting [Options > Auto search and save], the device searches for and saves the available channels.
You can view the saved channels in the Channel List menu. Select the channel you want to play from the list,
then press the center navigation key or select [Options > Play]. You can rename the stations in the channel
list in [Options > Edit]: type the name of the channel, then press the <Save> button (left function button).
Manual search
Go to the menu item [Options > Manual search], then enter the number of the channel frequency (in MHz),
save with the <Ok> button.
Play in the background
To play in the background, select [FM Radio > Options > Background play].
Turn on speaker
To turn on the speaker, select [FM Radio > Options > Settings > Open speaker]. The speaker can be turned
off in the same menu item. This menu item is only active if you listen to the radio with headphones. If no
headphones are connected, the radio will automatically play on the speaker.
Notes: the quality of the radio broadcast is affected by the environment. You can improve the quality by
searching manually and by moving the device closer to the window.
PROFILES
In menu mode, go to [Profiles] and select the profile you want to use. There are 7 profiles in the device:
Normal, Silent, Meeting, Indoor, Outdoor, Headphone, Bluetooth.
Turn silent mode on and off
If your device is in Normal mode, press # to activate Meeting mode. Press and hold # again to activate Silent
Mode. Press # again to return to Normal mode.
In Menu mode, go to [Profiles] and select Silent mode by pressing the middle button. You can return to the
Normal profile in the same menu item.
Personalize profiles
In menu mode, go to the [Profiles] menu, then select the profile you want to modify.
To change the profile, press [Options] and select <Settings>. In this menu, you can change the following
settings:
● Name the profile (Rename)
● Ring settings – select the ringtone for calls and messages
● Adjust volume - default volume setting for calls and messages
● Ring type - ringtone, vibration, ring and vibrate, silent mode.
● Other alert rings – key tone, low battery tone, power on/off tone, dial tone.