Blendtec Classic - Cleaning the Jar; Jar Cleaning Procedure

ENGLISH
9
CLEANING THE JAR
Beforeusingthejarforthersttime(andeachtimeafterblending),followtheseeasycleaningtips:
1. Add a cup (240 ml) of water and drop of dish soap to the jar.
2. Place the jar on the blender; press Clean cycle or pulse for 10 seconds.
3. Remove and rinse with warm water.
To clean the motor base, simply wipe with water or mild dish soap. Using other chemicals may cause cosmetic damage to the blender base.
When using the Blendtec GO accessory, be sure to remove the gasket from the micronizer and clean both thoroughly after each use.
For more information, please visit www.blendtec.com.