7
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Your serial number is located on the bottom of the motor base� Record your blender
motor serial number and date of purchase in the space below� You will need these
when contacting Blendtec for service or questions�
Motor Serial #:___________________________________________________
(Found on bottom of motor base)
Date of Purchase:____________________________________________________
Purchased From:___________________________________________________
2.3 REGISTRATION OF YOUR BLENDER - CANADA ONLY
Register online at www�blendtec�com� Select “Product Registration” on the top of the
page�
SECTION 3 - BLENDER OVERVIEW
(Refer to Figures 1 and 2)
3.1 BLENDER MOTOR BASE
Touchpad: Consists of nine buttons that control the blending process� (See Section 6
for more information on the specific control functions�)
Blender Drive Socket: This is where the jar drive shaft couples with the motor to turn the
blade assembly�
LCD Information Center: Indicates status of unit as well as overload or over-temperature
conditions�
Power Unit: This unit is located with the blender motor and contains the machinery that
runs the blender�
Power Switch: Located on the back lower-right corner of the motor base cover�
Power Cord: Located at the back of the motor base cover�
Motor Base Cover: Houses the power unit in durable, easy-to-clean plastic�
3.2 BLENDER JAR ASSEMBLY
The blender jar assembly consists of the blender jar, blade assembly, and lid�
Jar: Made from a durable BPA-free material to provide maximum efficiency and clear
visibility of blender performance�
Lid: Flexible rubber lid seals liquids within the jar during blending� The clear center
piece relieves pressure and allows quick addition of ingredients�
Blade Assembly: Stainless steel; designed to provide fast, consistent blending�
To Next Page
Loading...
