Installation Manual
BlinkCharging.com
•
(888) 998.2546
15
17 LCM /dev/ttyS4 Path - DO NOT CHANGE
18 LCM ENCODE TYPE UNICODE Encode - DO NOT CHANGE
19 LCM PASSWORD 123456 Password for access
20 RFID RFID0=/dev/ttyS1 Path - DO NOT CHANGE
21 PLUG1 GBTDC1:2=/dev/ttyS0 Path - DO NOT CHANGE
22 PLUG2 GBTDC2:2=/dev/ttyS0 Path - DO NOT CHANGE
23 DC1QRCODE NAME NA
24 RFID ORIGINAL NUMBER 1 NA
10. MAINTENANCE AND SERVICE
DANGER
READ AND FOLLOW THE “SAFETY CONCERNS” AT THE BEGINNING OF THIS MANUAL BEFORE
USING THIS DEVICE
EV Charging Stations require regular maintenance beyond installation to ensure the quality of the vehicle’s
charge, and the continued value of your electric vehicle. Whether you’re installing a personal EV charger, or
a public one for use, eventually you will require repair or maintenance services to keep your system working
without flaws.
MAINTENANCE PRECAUTIONS
Each of the capacitors in this device have a high voltage for a time after shutting off the input power supply.
Allow 1 minute after powering down before servicing internal components.
MAINTENANCE ITEMS
Perform periodic checks every 3 to 6 months based on the site conditions and the usage of the charging
station.
1. Check the input voltage and ensure it is within the acceptable limits.
2. Check the Ground / Earth resistance and ensure it is within the acceptable limits
3. Clean the Air Filter periodically
4. Make sure that Power Module lights are blinks green
5. Ensure the charging cables are not worn out and gun pins are clean.
6. Make sure all the air-cooling fans are working normally.
VISUAL CHECK ITEMS
1. Check for abnormal sound from running fans and power units. If there is abnormal sound, please contact
Tellus 949-534-3000 for further assistance.
2. Check for abnormal odor, changes of inner materials, corrosion, anomaly in appearance, etc., in this
device. If there are any anomalies, please contact a Tellus service representative for further assistance.
3. Check for dust and dirt in this device regularly. The air filters on the doors can be removed and cleaned
To Next Page
Loading...
