What to do if my Blizzard Lighting Light Fixture is not responding?
If your Blizzard Lighting Light Fixture isn't responding correctly, ensure all connectors are properly seated and secure. Use only DMX cables and check them for defects. Installing a terminator may also help. Try resetting the fixture.
What to do if my Blizzard Lighting pixellicious Light Fixture has no power?
If your Blizzard Lighting Light Fixture has no power, check the AC cord and circuit for any malfunctions.
Why does my Blizzard Lighting pixellicious have no light output?
If your Blizzard Lighting Light Fixture has no light output, check to ensure the fixture is operating under the correct mode, such as sound active, auto, or DMX, if applicable.
What to do if my Blizzard Lighting Light Fixture has no response to audio?
If your Blizzard Lighting Light Fixture isn't responding to audio, verify that the fixture is in “Sound Active” mode.
Why is my Blizzard Lighting pixellicious moving on its own?
If your Blizzard Lighting Light Fixture is moving on its own, verify the proper mode of operation. Check if the fixture is in “Auto” mode.
Why is the movement of my Blizzard Lighting pixellicious so slow?
If the movement of your Blizzard Lighting Light Fixture is slow, check that the speed channels are set appropriately.
Guidance on safely powering the fixture and verifying voltage selection.
Crucial safety guidelines for installation, usage, and maintenance of the product.
Table detailing DMX channel assignments for 8 and 35 channel modes.
Table detailing DMX channel assignments for 480 channel mode.
Procedures for safely mounting the fixture and ensuring adequate ventilation.
Detailed breakdown of the fixture's menu options and available settings.
Explanation of how to set up DMX addressing and channel modes.
Detailed explanation of DMX channel functions for 8-channel mode.
Common issues and their corresponding solutions for the fixture.
Technical specifications of the Pixellicious LED fixture.
General| Input Voltage | 100-240VAC, 50-60Hz |
|---|---|
| Beam Angle | 25° |
| Protection | IP20 |
| Dimensions | 39.4" x 2.5" x 6.5" (1000 x 64 x 165 mm) |
| Fuse | 250V |
| Control | DMX-512 |
To Next Page
