What to do if my Blizzard Lighting Light Fixture is not responding or responding erratically?
If your Blizzard Lighting Light Fixture isn't responding correctly, ensure all connectors are securely seated. Use only DMX cables, and check them for defects. Try installing a terminator and resetting the fixture.
What to do if my Blizzard Lighting Light Fixture has no power?
If your Blizzard Lighting Light Fixture has no power, check the fuse, AC cord, and circuit for any malfunctions.
What to do if my Blizzard Lighting Light Fixture fuse is blown?
If the fuse in your Blizzard Lighting Light Fixture has blown, check the AC cord and circuit for damage. Also, verify that moving parts are not restricted and that the unit’s ventilation is not obstructed.
What to do if my Blizzard Lighting Light Fixture has no light output?
If your Blizzard Lighting Light Fixture has no light output, check if the fixture is operating under the correct mode.
Overview of the product's key features and capabilities.
Instructions on how to replace the fixture's fuse.
Guidance on linking fixtures and selecting appropriate DMX cables.
Step-by-step guide to configuring DMX control.
How to connect fixtures in master/slave configuration.
Guidelines for safely mounting and rigging the fixture.
Overview of the fixture's control panel buttons and display.
How to set DMX modes, addresses, and master/slave connections.
Manual color mixing, presets, strobe, and program modes.
Settings for dimming curves, power saving, and temperature.
Common issues and their solutions for the fixture.
General| Light Source | LED |
|---|---|
| LED Life | 50, 000 hours |
| Beam Angle | 25° |
| IP Rating | IP20 |
| Weight | 5.5 lbs |
| Power Source | Battery or AC |
| Battery | Lithium-ion |
| Recharge Time | 5 hours |
| Control Protocol | DMX512 |
| Control | DMX, Sound Active |
| DMX Channels | 6/8/12 |
| Wireless Control | Yes |
| LED Type | 6-in-1 RGBAW+UV |
To Next Page
