EasyManua.ls Logo

Blizzard Lighting LB HEX Unplugged - 1 Getting Started; Getting a Hold of Us; Getting It out of the Box; LB Hex Unplugged

Blizzard Lighting LB HEX Unplugged
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 4
LB Hex™ Unplugged Manual Rev. A © 2018 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x LB Hex™ Unplugged LED Fixture
• 1 x Power Cord
• This User Manual
Getting It Out Of The Box
Congratulations on getting the LB Hex™ Unplugged, the optimum solution for get-
tingridofallthosemessycablesisnallyhere.Whew!Nowthatyou’vegotyourLB
Hex™ Unplugged (or hopefully, Unpluggeds!), you should carefully unpack the box
and check the contents to ensure that all parts are present and in good condition. If
anything looks as if it has been damaged in transit, notify the shipper immediately
and keep the packing material for inspection. Again, please save the carton and all
packingmaterials.Ifaxturemustbereturnedtothefactory,itisimportantthat
thexturebereturnedintheoriginalfactoryboxandpacking.
Powering Up!
Allxturesmustbepowereddirectlyoaswitchedcircuitandcannot be run o
a rheostat (variable resistor) or dimmer circuit, even if the rheostat or
dimmer channel is used solely for a 0% to 100% switch.
AC Voltage Switch -Notallxtureshaveavoltageselectswitch,sopleaseverifythat
thextureyoureceiveissuitableforyourlocalpowersupply.Seethelabelonthe
xtureorrefertothexture’sspecicationschartformoreinformation.Axture’s
listed current rating is its average current draw under normal conditions. Check the
xtureordevicecarefullytomakesurethatifavoltageselectionswitchexiststhatit
is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the
line voltage applied. Damage to your xture may result if the line voltage
applied does not match the voltage indicated on the voltage selector switch.
All xtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something happens goes wrong, please visit www.blizzardlighting.com/
support and open a support ticket. We’ll be happy to help, honest.
Disclaimer:Theinformationandspecicationscontainedinthisdocumentare
subject to change without notice. Blizzard Lighting™ assumes no responsibility or
liability for any errors or omissions that may appear in this user manual. Blizzard
Lighting™ reserves the right to update the existing document or to create a new
document to correct any errors or omissions at any time. You can download the
latest version of this document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 5/23/2018 J. Thomas 8/9/2018

Related product manuals