Blizzard Lighting LB HEX Unplugged - Using the Intelion Battery System; Using with Wicicle Wireless DMX Receivers

Page 10
LB Hex™ Unplugged Manual Rev. A © 2018 Blizzard Lighting, LLC
Using with wiCICLE® Wireless DMX Receivers
In addition to the unbridled thrill you already re-
ceivedthersttimeyoupoweredupyourxture,
you’ll be delighted to know that this unit also
works seamlessly with our wiCICLE
®
Skywire re-
ceiver and wiCICLE
®
AnyFi wireless DMX receiver
products without need to supply external
power to the receiver. Power is directly given to the receiver via the DMX
input connection.
•ONLYxturesbearingthislogoarecertiedforusewiththewiCICLE
®
with-
out external power.
•Unauthorizedmodicationand/orusingthewiCICLE
®
with unapproved
xturesmaycausedamagetothewiCICLE
®
orxture.UNDERNOCIRCUM-
STANCES IS BLIZZARD LIGHTING RESPONSIBLE FOR ANY DAMAGE FROM
SUCH OPERATION.
• Fixtures bearing the above logo MUST only use cable and connectors which
separate chassis/case ground from cable shielding. Cabling with the shield con-
nected to the connector’s case/chassis may cause malfunction and damage to
the wiCICLE
®
orxture.
• wiCICLE
®
transmitters have additional power requirements and cannot be
powereddirectlyfromthexture.
• Please refer to the instruction manual that came with your wiCICLE
®
receiver
and/or transmitter for detailed setup instructions.
Using the Intelion™ Battery System
Tochargethebattery,simplyplugthextureintoapowersource.Thebattery
chargeswhenthextureisonoro.Thebuilt-inmicroprocessorofthebattery
system controls the charge and overall battery health, so just plug and play.
To display the power remaining in the battery, press and
hold the <MENU> button for 5 seconds.
A full charge is obtained after charging for at least 3 1/2
hours.Thexturewillautomaticallystopchargingwhen
the battery is in optimal condition.
Power Saving Mode:
a.) Navigate the menu to reach TL--, and press <ENTER>.
b.) Use the <UP/DOWN> buttons to select TL1 (50%), or TL2 (100%).
c.) Press <ENTER>toconrmthesetting.
Note: With average usage of color fades in Full Power Mode, you can expect the
battery life to last up to 15+ hours, or full on for 4+ hrs. Display color/fade/
chase/strobe, and environmental factors including ambient temperature will all
impact battery life.